 Rock
crushing is a series of processes designed to take large rocks and reduce them to
smaller rocks. This can be crushing down to gravel size rocks or down to fine rock
dust. Most rock crushers produce aggregates and ready-to-process mining ores, as
well as rock fill material for landscaping and erosion control. Although some crushers
can be mobile most are fixed in quarries. Other applications see in conjunction
with crushing are screening and conveying where fugitive dust can result.
The primary consideration in selecting media for crushing applications is: loading
capacity, strength, media efficiency, and dust release properties. Media recommended
in the “good” column will provide adequate performance and represents the lowest-cost
option. “Better” media will provide improved overall performance at a slight increase
in cost. The “Best” option provides the highest level of performance, longevity
and minimal particle discharge for this application.
Use the following Selection Guide when the OEM filter specification is not known
or you wish to select a different media in order to address a performance issue
or problem.
|
|
 |
|
|
|
|
|
|
|
Filter Types |
|
|
|
|
|
|
|
|
|
Cylindrical Filter Cartridge |
|
Hook Filter Cartridge |
|
|
|
|
|
|
|
|
 |
|
The cylindrical is the most common type of cartridge filter with many OEMs. We can
make any length you need up to 60”. Our diameters range from 6.8” to 22.5”. We’ll
help you select the media that is correct for your application. |
|
 |
|
This style filter can also be made with plastic end caps. You can choose from any
diameter from 5.38” to 9.65” and any length up to 60”. The common OEMs are Mix and
Altair SLR. |
|
|
|
|
|
|
|
|
|
Lip Flange Cartridge |
|
Screw Top Cartridge |
|
|
|
|
|
|
|
|
 |
|
The lip flange filter style can be made in diameters from 13.875” to 14.25” and
in any length up to 60”. Common OEMs are BCP, Wheelabrator® and USF/Surface Prep.
This style filter can be made with any of our full complement of media. |
|
 |
|
The three most common OEMs are Mahle, Tamrock and Neuman and Esser. We can make
any diameter from 4.25” to 6.30” and any length up to 60”. Our full selection of
media will provide you the best solution. |
|
|
|
|
|
|
|
|
|
Shake Filter with Prefilter |
|
Square Flange filter |
|
|
|
|
|
|
|
|
 |
|
As a replacement to Donaldson®’s Vibra Shake™ Units with prefilters, you can be assured
our quality will meet or exceed the OEMs. The diameter is 16.5” with lengths including
10”, 20” and 26”. |
|
 |
|
The square flange cartridge can be found in OEMs such as Farr, Semco® Bulk Transfer,
Wheelabrator®, and United Air Specialist®. We can produce multiple diameters from
and any length up to 60”. Our experts will help you choose the best media for your
situation. |
|
|
|
|
|
|
|
|
|
Twist Lock Filter |
|
Oil Mist Filter |
|
|
|
|
|
|
|
|
 |
|
This is a direct replacement for a pneumafil filter. We can provide all three lengths
- 24", 29" and 34". We can also make the filter in the media tht will be most suitable
for your application. |
|
 |
|
These oil mist filters come in diameters that range from 11.08” to 22.5”. The lengths
range from 8” to 25”. If your application has oil and particulate in the gas stream,
then this is the filter for you. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Design Options |
|
|
|
|
|
|
|
|
|
|
|
Inner Core Options |
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
End Cap Options |
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
Outer Construction Options |
|
|
|
|
|
 |
 |
|
 |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"TDC Filter is a trademark and trade name of TDC Filter Company. Donaldson®, Farr,
Torit®, Wheelabrator®, Dust Hog®, BACT,
American Air Filter®, Pneumafil, Scientific Dust Collector, UAS, BCP, USF Surface
Prep, Vibra Shake™, Mix, Altair SLR,
Manle,
Tamrock, and Neuman and Esser
are registered trademarks, trademarks, or
names of their respective companies.
TDC Filter is not affiliated, connected or
associated with any of these companies." |
|
|
|