 Abrasive
materials are tough on all equipment. Fortunately we have the filters to handle
the affects of sharp and hot materials. TDC Filter offer the best in the industry
for airflow and
product capture. Count on us to get the right filter for all equipment:
conveyors, bucket elevators, chutes, silos and bin vents.
Nothing compares to our unique materials and approach.
Use the following Selection Guide when the OEM filter specification is not known
or you wish to select a different filter media. The primary consideration for selecting
media is efficiency, strength, and dust release properties.
Media recommended in the “good” column will provide adequate performance and represents
the lowest-cost option. “Better” media will provide improved overall performance
at a slight increase in cost. The “Best” option provides the highest level of performance,
longevity and minimal particle discharge for this application. |
|
 |
|
|
|
|
|
|
|
Filter Types |
|
|
|
|
|
|
|
|
|
Cylindrical Filter Cartridge |
|
Hook Filter Cartridge |
|
|
|
|
|
|
|
|
 |
|
The cylindrical is the most common type of cartridge filter with many OEMs. We can
make any length you need up to 60”. Our diameters range from 6.8” to 22.5”. We’ll
help you select the media that is correct for your application. |
|
 |
|
This style filter can also be made with plastic end caps. You can choose from any
diameter from 5.38” to 9.65” and any length up to 60”. The common OEMs are Mix and
Altair SLR. |
|
|
|
|
|
|
|
|
|
Lip Flange Cartridge |
|
Screw Top Cartridge |
|
|
|
|
|
|
|
|
 |
|
The lip flange filter style can be made in diameters from 13.875” to 14.25” and
in any length up to 60”. Common OEMs are BCP, Wheelabrator® and USF/Surface Prep.
This style filter can be made with any of our full complement of media. |
|
 |
|
The three most common OEMs are Mahle, Tamrock and Neuman and Esser. We can make
any diameter from 4.25” to 6.30” and any length up to 60”. Our full selection of
media will provide you the best solution. |
|
|
|
|
|
|
|
|
|
Shake Filter with Prefilter |
|
Square Flange filter |
|
|
|
|
|
|
|
|
 |
|
As a replacement to Donaldson®’s Vibra Shake™ Units with prefilters, you can be assured
our quality will meet or exceed the OEMs. The diameter is 16.5” with lengths including
10”, 20” and 26”. |
|
 |
|
The square flange cartridge can be found in OEMs such as Farr, Semco® Bulk Transfer,
Wheelabrator®, and United Air Specialist®. We can produce multiple diameters from
and any length up to 60”. Our experts will help you choose the best media for your
situation. |
|
|
|
|
|
|
|
|
|
Twist Lock Filter |
|
Oil Mist Filter |
|
|
|
|
|
|
|
|
 |
|
This is a direct replacement for a pneumafil filter. We can provide all three lengths
- 24", 29" and 34". We can also make the filter in the media tht will be most suitable
for your application. |
|
 |
|
These oil mist filters come in diameters that range from 11.08” to 22.5”. The lengths
range from 8” to 25”. If your application has oil and particulate in the gas stream,
then this is the filter for you. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Design Options |
|
|
|
|
|
|
|
|
|
|
|
Inner Core Options |
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
End Cap Options |
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
Outer Construction Options |
|
|
|
|
|
 |
 |
|
 |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"TDC Filter is a trademark and trade name of TDC Filter Company. Donaldson®, Farr,
Torit®, Wheelabrator®, Dust Hog®, BACT,
American Air Filter®, Pneumafil, Scientific Dust Collector, UAS, BCP, USF Surface
Prep, Vibra Shake™, Mix, Altair SLR,
Manle,
Tamrock, and Neuman and Esser
are registered trademarks, trademarks, or
names of their respective companies.
TDC Filter is not affiliated, connected or
associated with any of these companies." |
|
|
|