 Powder
coating is a large user of conventional pulse type cartridges. In the dry finishing
process, the finely ground particles of pigment and resin are electrostatically
charged and sprayed onto the products to be coated. The parts to be coated are also
electrically grounded, so that the charged particles adhere to them until melted
and fused into a solid coating in a curing oven. Unlike liquid paints, over sprayed
powder can be recovered, so any waste is minimal and can be disposed of easily and
safely. Choose SB or SBTX to be able to wash and reuse your cartridge.
Selection of the best media for powder coating greatly depends upon volume of powder
being used, the types of powder and the objectives in powder reclaim. Selecting
the correct media will reduce fish eyes, rejects and reduce the number
of times
you have to change the filters.
Use the following Selection Guide when the OEM filter specification is not known
or you wish to select a different filter media.
Media recommended in the “good” column will provide adequate performance and represents
the lowest-cost option. “Better” media will provide improved overall performance
at a slight increase in cost. The “Best” option provides the highest level of performance,
longevity and minimal particle discharge for this application. primary considerations
for media selection are efficiency, strength and dust release properties. |
|
 |
|
|
|
|
|
|
|
Filter Types |
|
|
|
|
|
|
|
|
|
Cylindrical Filter Cartridge |
|
Hook Filter Cartridge |
|
|
|
|
|
|
|
|
 |
|
The cylindrical is the most common type of cartridge filter with many OEMs. We can
make any length you need up to 60”. Our diameters range from 6.8” to 22.5”. We’ll
help you select the media that is correct for your application. |
|
 |
|
This style filter can also be made with plastic end caps. You can choose from any
diameter from 5.38” to 9.65” and any length up to 60”. The common OEMs are Mix and
Altair SLR. |
|
|
|
|
|
|
|
|
|
Lip Flange Cartridge |
|
Screw Top Cartridge |
|
|
|
|
|
|
|
|
 |
|
The lip flange filter style can be made in diameters from 13.875” to 14.25” and
in any length up to 60”. Common OEMs are BCP, Wheelabrator® and USF/Surface Prep.
This style filter can be made with any of our full complement of media. |
|
 |
|
The three most common OEMs are Mahle, Tamrock and Neuman and Esser. We can make
any diameter from 4.25” to 6.30” and any length up to 60”. Our full selection of
media will provide you the best solution. |
|
|
|
|
|
|
|
|
|
Shake Filter with Prefilter |
|
Square Flange filter |
|
|
|
|
|
|
|
|
 |
|
As a replacement to Donaldson®’s Vibra Shake™ Units with prefilters, you can be assured
our quality will meet or exceed the OEMs. The diameter is 16.5” with lengths including
10”, 20” and 26”. |
|
 |
|
The square flange cartridge can be found in OEMs such as Farr, Semco® Bulk Transfer,
Wheelabrator®, and United Air Specialist®. We can produce multiple diameters from
and any length up to 60”. Our experts will help you choose the best media for your
situation. |
|
|
|
|
|
|
|
|
|
Twist Lock Filter |
|
Oil Mist Filter |
|
|
|
|
|
|
|
|
 |
|
This is a direct replacement for a pneumafil filter. We can provide all three lengths
- 24", 29" and 34". We can also make the filter in the media tht will be most suitable
for your application. |
|
 |
|
These oil mist filters come in diameters that range from 11.08” to 22.5”. The lengths
range from 8” to 25”. If your application has oil and particulate in the gas stream,
then this is the filter for you. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Design Options |
|
|
|
|
|
|
|
|
|
|
|
Inner Core Options |
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
End Cap Options |
|
|
|
|
|
 |
 |
 |
 |
|
|
|
|
|
|
Outer Construction Options |
|
|
|
|
|
 |
 |
|
 |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"TDC Filter is a trademark and trade name of TDC Filter Company. Donaldson®, Farr,
Torit®, Wheelabrator®, Dust Hog®, BACT,
American Air Filter®, Pneumafil, Scientific Dust Collector, UAS, BCP, USF Surface
Prep, Vibra Shake™, Mix, Altair SLR,
Manle,
Tamrock, and Neuman and Esser
are registered trademarks, trademarks, or
names of their respective companies.
TDC Filter is not affiliated, connected or
associated with any of these companies." |
|
|
|